Cellwood PG50SAMPLE N3 Guía de instalación descargar pdf (Pagina 63)

starter strip installation

shingle product accessory installation

STARTER

• Snap a chalk line on all walls

to align the top edge of the

starter strip (or J-channel).

• Installation of starter strip (or

J-channel) and panels should

begin on the lowest wall.

• Install starter strip (or J-chan-

nel) along the chalk line, nailing

in nail slots to allow for penetra-

tion into solid wood. Wood

stripping may be required to ac-

complish this. Nail every 6-8˝.

DO NOT NAIL TIGHT.

• To allow for movement, install

starter strip (or J-channel) ½˝

from corner post (see Figure 1).

ACCESSORIES

• If using conventional corner

post, nail at least every 12˝ and

DO NOT NAIL TIGHT

• Install all accessories including

J-channel, corners, etc.

Note: accessories must have 3/4˝

receiver.

Fig.1

Standard Corner Post

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 89 90

Sin comentarios

Cellwood PG50SAMPLE N3 Guía de instalación Pagina 63